Work Node 01 (eb01) was rebuilt and put back into service with the following
configuration on April 5, 2008:
| Component Type | Description |
|---|
| Processor | Intel Core® 2 Duo E6600 Processor (dual-core 64-bit processor operating at 2.40 GHz) |
| RAM | 4.0GB total RAM as two pairs of 800 MHz DDR-2 DIMMs (Kingston KVR800D2N5K2/2G) |
| System Board | Intel DP965LT motherboard |
| Case | Unbranded mid-tower case |
| Power Supply | Liberty Enermax ELT500AWT-00/01 500 Watt ATX 12V v2.2 SLI-capable power supply |
| Fans and Cooling | Antec 80mm exhaust fan and ThermalTake 80mm intake fan |
| Hard Disk Drives | Western Digital 300MB/s 500GB SATA drive |
| Optical Disk Drives | Pioneer DVR-215DBK DVD±RW drive (replaced Toshiba DVD-ROM drive June, 2008) |
| Other Disk Drives | 3.5-inch (1.44MB) floppy-disk drive |
| NIC | Integrated 10/100/1000 (Gigabit) Ethernet adapter |
| Graphics Adapter | EVGA e-GeForce FX 5200 128MB PCI adapter |
| USB Interfaces | Multiple USB 2.0 interfaces |
| FireWire Interfaces | Integrated IEEE 1394 interface |
| Other Interfaces | Parallel printer port, integrated audio, PS2 keyboard and mouse |
| External Devices | [none] |
| Additional Components | [none] |
| Notes | - - |
Work Node 01 (eb01) was rebuilt and put back into service with the following
configuration on March 10, 2006:
| Component Type | Description |
|---|
| Processor | AMD Athlon® XP 2100+ processor (operating at 1.740778 GHz) |
| RAM | 1.5GB total RAM as three 512MB DDR DIMM's |
| System Board | DFI KT600-AL (Rev. A+)motherboard |
| Case | Unbranded mid-tower case |
| Power Supply | Antec Smartpower 350W ATX12V v. 1.3 power supply (Model SL350) |
| Fans and Cooling | 80mm case fan and 80mm CPU fan replaced March 6, 2006 |
| Hard Disk Drives | IBM 80GB 3.5-inch IDE drive |
| Optical Disk Drives | CD-ROM drive |
| Other Disk Drives | 3.5-inch (1.44MB) floppy-disk drive |
| NIC | Linksys® EG1032 Gigabit Ethernet network interface card |
| Graphics Adapter | Xpert2000Pro Ultra 32M AGP adapter |
| USB Interfaces | USB 1.0 and 2.0 interfaces |
| FireWire Interfaces | [none] |
| Other Interfaces | RS-232C and parallel printer port |
| External Devices | [none] |
| Additional Components | [none] |
| Notes | - - |
Work Node 01 (eb01) had the following initial configuration on receipt of hardware:
| Component Type | Description |
|---|
| Processor | AMD Athlon® XP 2100+ processor (operating at 1.740778 GHz) |
| RAM | 1.5GB total RAM as three 512MB DDR DIMM's |
| System Board | DFI KT600-AL (Rev. A+)motherboard |
| Case | Unbranded mid-tower case |
| Power Supply | Antec Smartpower 350W ATX12V v. 1.3 power supply (Model SL350) |
| Fans and Cooling | Antec 80mm case fan and Thermaltake 80mm CPU fan installed March 7, 2006 |
| Hard Disk Drives | IBM 80GB 3.5-inch IDE drive |
| Optical Disk Drives | CD-ROM drive |
| Other Disk Drives | 3.5-inch (1.44MB) floppy-disk drive |
| NIC | Linksys® EG1032 Gigabit Ethernet network interface card |
| Graphics Adapter | Xpert2000Pro Ultra 32M AGP adapter |
| USB Interfaces | USB 1.0 and 2.0 interfaces |
| FireWire Interfaces | [none] |
| Other Interfaces | RS-232C and parallel printer port |
| External Devices | [none] |
| Additional Components | [none] |
| Notes | - - |
U.S. Department of the Interior |
U.S. Geological Survey |
DOI Inspector General